|
|
Post by tonymalone on Jan 16, 2008 19:52:07 GMT -5
has any body got any tips on replaceing them? i clean all surfaces on jaws and cover, for a better fit, but they just don't stay, like the ones that come on them, seems like atleast one end comes loose on most of them. dang if they were only 1/16 wider the clamp would bite them better, if ya replace many, ya know what i'm talking about.
|
|
|
|
Post by gameboy on Jan 16, 2008 19:57:31 GMT -5
I've had the same trouble Tony. They sure are close on the fit.
|
|
rn
Fair Weather Trapper
Posts: 90
|
Post by rn on Jan 18, 2008 8:32:28 GMT -5
Have you tried any a Carlis Stevens kits, Sudden Valley Supply I think is the name, 314-283-7186. I have not tried them but he seems to sell a lot.
|
|
|
|
Post by tonymalone on Jan 18, 2008 13:09:18 GMT -5
hey rn, yea i've gottem on some bridger#2, if ya get some use 3 screws instead of 2.
|
|
|
|
Post by motrapperjohn on Jan 24, 2008 11:30:49 GMT -5
tony malone I do have some kites just for the #3s you will still use the victor top strap but my bottom strap and screws and lock nuts maybe that could take care of the problem.
|
|
|
|
Post by tonymalone on Jan 24, 2008 12:33:44 GMT -5
it's the top strap that don't quite reach, well really it's the pad that don't reach quite far enough under the top strap. do they bolt on kinda like the sudden valley pads and straps?
|
|
|
|
Post by motrapperjohn on Jan 31, 2008 22:21:40 GMT -5
Dont quite understand what you mean about the pads. The pads of mine are just like what you have one the #2s, when you use the victor strap it bites down over the pad , wrapping it over the back of the jaw and the bottom strap holds the bottom of the pad.
|
|
|
|
Post by motrapperjohn on Jan 31, 2008 22:23:24 GMT -5
Need any help or questions give me a call 314-283-7186 Carlis
|
|
